When working on an Android emulator, we sometimes want
to make changes that can survive a reboot. This isn’t a problem for things like
installing applications (which is usually what you are using the emulator for),
because of the way that the AVD Manager creates your virtual device. However, system changes
(that is, changes to the /system partition) will not survive on a
reboot. There are legitimate reasons to
do this; here are just a few off the top of my head:
- Adding or modifying system binaries in the /system/bin or /system/xbin directories
- Adding entries to the /system/etc/hosts file for redirection for specific domains
- Changing settings in the /system/build.prop file such as the device manufacture and phone model (for apps that refuse to run on certain devices)
- Adding entries to the android cert file at /system/etc/security/cacerts.bks so
that the device trusts self-signed certificates (again, for proxying)
This post will show you how you can make changes to files on
the system partition on your Android emulator that will persist.
First let’s make an Android virtual device (AVD). I’m going to use API 8, the standard Froyo
distribution, for the target. Note that
I’m creating a SD card image with this AVD that is 512MB. This should be plenty of space to store temporary system image. I chose the name “Froyo” but you can use
whatever you like.
When we press “Create AVD”, the AVD Manager creates some files in the ~/.android/avd/ directory (this location may vary on Windows). Specifically, it creates:
When we press “Create AVD”, the AVD Manager creates some files in the ~/.android/avd/ directory (this location may vary on Windows). Specifically, it creates:
- [avd_name].ini - A file containing configuration settings that point to the AVD’s directory
- [avd_name].avd - A directory containing settings and file-system images specific to this AVD – the SD card image and the user data image are a couple examples (others are created after the AVD boots up)
Our ./Froyo.avd/config.ini file looks like this:
The contents of the Froyo.avd directory:
The remaining file-system images are common to all AVD of a specific API level, and can be found at $SDK_HOME/platforms/android-*/images/. This will focus on changes to the system.img partition. This, by default, is mounted as read-only (just as a real device would), and even if you remount the drive and make changes, they will not persist on a system reboot. Our goal is to make a custom system.img file, and have the AVD load this image instead of the default image.
Before we get started, you’ll need to obtain a copy of the mkfs.yaffs2 utility compiled for ARM. Go ahead and start our new emulator, making sure to specify a safe “partition-size”.
Once the emulator boots, we can make the changes we wish to reflect on our custom system image. For this example, I’ll change the “ro.product.brand” field in the system/build.prop file, but you could do any changes you want. First we need to pull the /system/build.prop file so that we can edit it (no editor is available from the shell). We can accomplish this with the command:
The contents of the Froyo.avd directory:
The remaining file-system images are common to all AVD of a specific API level, and can be found at $SDK_HOME/platforms/android-*/images/. This will focus on changes to the system.img partition. This, by default, is mounted as read-only (just as a real device would), and even if you remount the drive and make changes, they will not persist on a system reboot. Our goal is to make a custom system.img file, and have the AVD load this image instead of the default image.
Before we get started, you’ll need to obtain a copy of the mkfs.yaffs2 utility compiled for ARM. Go ahead and start our new emulator, making sure to specify a safe “partition-size”.
Once the emulator boots, we can make the changes we wish to reflect on our custom system image. For this example, I’ll change the “ro.product.brand” field in the system/build.prop file, but you could do any changes you want. First we need to pull the /system/build.prop file so that we can edit it (no editor is available from the shell). We can accomplish this with the command:
Then we can edit the file (Disclaimer - editing this file may
affect the stability of the system!):
Now we can remount the system partition as read-write and push the new file to the device:
Now we can remount the system partition as read-write and push the new file to the device:
If all your changes are complete, the next step is to run the mkfs.yaffs2 utility on the device to create a *.img file we can use. To make this easier, I wrote a small shell script (getimage.sh) to automate the steps. The steps should be easily followed by reading the script.
Running the script yields the following output:
We now have a file called _system.img in our current working directory. At this point we have two options.
We now have a file called _system.img in our current working directory. At this point we have two options.
Option 1 – Replace the Global system.img
If you are alright with the change applying to all of the AVD’s
that you run at this particular API level, you can simply move the new image
where the old image was. It’s important
to back-up the old system.img in case something went terribly wrong. As stated above, the image files are located
at $SDK_HOME/platforms/android-*/images/.
Now when you restart your AVD, you should see the changes.
Option 2 – Modify the AVD's Configuration
Let’s say that you want this change to apply only to this
specific AVD. This can be accomplished by cloning the images directory, and then modifying our AVD's configuration.
The line we need to change is the "image.sysdir.1" parameter of the Froyo.avd/config.ini file:
And we're done! Hope this helps some people with customizing their emulator images.
-jakev
The line we need to change is the "image.sysdir.1" parameter of the Froyo.avd/config.ini file:
And we're done! Hope this helps some people with customizing their emulator images.
-jakev